Auto brakes in White Bear Lake MN are one of a car’s most important safety components, and drivers should know the signs of brake failure. Proper braking can make the difference between a safe getaway and a serious accident. Below are several signs that a car may need brake repair at American Imports.
Brakes Squealing Upon Application
A vehicle’s brakes are designed to make noise when the pads become worn. The noise involves a small component that makes a shrill noise when the brakes are applied. A screeching or squealing noise is often a warning sign of brake failure, and the driver should take the car in for service as soon as possible.
Whole-Vehicle Vibration
If the car shakes, vibrates, or makes other abnormal motions when the brakes are applied, warped rotors may be to blame. The brake pads are supposed to grab the rotors and slow the car down, but a set of warped rotors can greatly diminish the brake system’s effectiveness.
Grinding and Howling
When a grinding or howling noise emanates from Auto Brakes in White Bear Lake MN, it’s likely occurring because there is very little, or no, brake pad material left. If this applies, the driver should bring the vehicle in for drum, pad, and rotor replacement. Only a complete system overhaul will restore the car’s braking power.
Soft Brake Pedal
If there’s a lot of “give” in the brake pedal, it may be because the brake pads are excessively worn. However, it could indicate a more serious issue such as an air bubble in the brake lines or a low brake fluid level.
Pulling to the Side
If the driver applies the brakes and the car swerves to either side, it usually indicates a problem with the braking system. The main culprits are collapsed brake hoses, uneven pad wear, or contaminated brake fluid. To determine the nature of the problem, the owner should take the car in for professional diagnosis as soon as possible. The brakes are a very important safety component, and drivers should only trust them to a licensed, insured, and certified brake repair professional.
